How to Lift a Truck

If you’re looking for a stylized, more aggressive look and enhanced off-road capability for your truck, you’re probably looking into lifts. So, how difficult will it be to learn how to lift a truck if you’ve never done it before?

That depends largely on the type of lift you want. A leveling kit or a small, one-inch lift is much easier to install than a six-inch lift that requires body and suspension work. Unless you have extensive experience, we suggest scheduling lift kit installation at a certified dealership like Advantage Dodge Ram Chrysler Jeep FIAT. Below, we’ll dive into the details of how to lift a truck, lift kits vs. leveling kits, and more.

Lift Kits vs. Leveling Kits

Most trucks roll off the assembly line with a front that sits lower than the rear. This is done to account for heavy loads weighing down the truck bed. Leveling kits raise the back end of the truck level with the front, and can add a few inches of lift in the process. Learning ​​how to lift a truck with a leveling kit isn’t too difficult, and many Aztec drivers can easily do the job in a weekend.

Lift kits raise both ends of a truck anywhere from two inches to six inches or more. Again, the extent of the lift may impact whether or not you can do it on your own. If your chosen loft kit requires body work or changes to your truck’s suspension system, we highly recommend scheduling professional service near Bloomfield.

How Do I Lift My Truck At Home?

Now that you’re ready to get started, how do you lift your truck? Although your first point of reference should be the instruction manual that came with your lift kit, we’ll provide an abridged outline of the process to help you decide whether it’s worth your time to learn how to lift a truck the DIY way:

1. Disconnect the negative battery cable.
2. Loosen the lug nuts on your tires so that they’re easier to remove after you’ve jacked your truck off the ground.
3. Raise your truck off the ground with your jack and jack stands. to raise the vehicle. Set aside plenty of time for this step, and make sure that the vehicle’s center of gravity is where it needs to be.
4. Remove the wheels and tires and set them someplace out of the way.
5. Remove your truck’s shocks, springs, and old U-bolts.
6. Attach the new bolts, new shocks, and suspension according to the instructions of your lift kit.
7. Using a torque wrench, check that all parts and bolts are tightened according to the proper specs.
8. Re-install your old tires or install a new larger set.
9. Gradually lower your truck off the jacks while keeping it as level as possible.

Keep in mind that more significant lifts may require the installation of p[arts such as a longer driveshaft, a new transfer case, or other components.

How long does it take to lift a truck? Even with lots of experience and all the proper tools at their disposal, trained service technicians will need anywhere between seven and fifteen hours to install a lift kit. If you’re installing yours at home, be sure to budget at least twice as much time or more.

Order RAM Lift Kits & Accessories From Advantage Dodge Ram Chrysler Jeep FIAT of Farmington

If you have any questions as you compare RAM lift kits and leveling kits, contact the team at Advantage Dodge Ram Chrysler Jeep FIAT and we’ll be happy to assist! Start exploring lift kits and other truck accessories available to order from our parts department, or visit us today near Shiprock. Check out our parts specials in the meantime.